2019年3月25日美方发布301征税340亿清单第二批产品排除目录
此次没有排除,恢复加征25%关税名单
|
美国税号
|
恢复加征25%关税产品(英文版)
|
恢复加征25%关税产品(中文参考版)
|
8430.31.0040
|
所有商品
|
8413.70.2004
|
Submersible centrifugal pumps,each powered by 36 v motor
|
潜水离心泵,毎台由36V电机供电
|
8413.91.9095
|
Impellers of plastic designed for centrifugal pumps,each of the foregoing with outside dianeter of 73 mm or more but not more than 74 mm.(described in statistical reporting number 8413.91.9095, effective January 1, 2019; described in statistical reporting number 8413.91.9080, effective prior to January 1, 2019)
|
铸铁叶轮外壳;为离心泵设计的塑料叶轮,上述每根外径为73毫米或以上但不超过74臺米。2019年1月1日之前编码:8413.91.9080,1月之后编码:8413.91.9095
|
8413.91.9095
|
Impeller housings of cast iron(described in statistical reporting number 8413.91.9095, effective January 1, 2019; described in statistical reporting number 8413.91.9080, effective prior to January 1, 2019)
|
铸铁叶轮外壳。2019年1月1日之前编码:8413.91.9080,1月之后编码:8413.91.9095
|
8414.90.4165
|
Compressor housings designed for turbochargers
|
为涡轮增压器设计的压縮机壳体
|
8421.19.0000
|
Salad spinners,of plastics,not electrically powered
|
塑料沙拉旋转器,非电动
|
8421.21.0000
|
Machinery designed for removing waste from water in saltwater aquariums by injecting air bubbles then filtering such bubbles
|
通过注入气泡然后过滤掉气泡来从盐水水族馆的水中去除废物的机械
|
8421.21.0000
|
Electronic water oxidizers designed for purifying water for household washing machines
|
设计用于净化家用洗衣机水的电子水氧化剂
|
8428.32.0000
|
Steel L-shaped bucket elevator,each comprising steel buckets bolted to a steel chain with guide wires and drive system
|
钢制L形斗式提升机,每个都包括用栓固定在钢上的钢制支架,带有导丝和驱动系统
|
8439.91.9000
|
Rotors designed to agitate paper and water into pulp,of stainless steel, the foregoing comprising parts of machinery for making pulp of fibrous cellulosic materials
|
设计用于将纸和水搅拌成不锈钢纸浆的转子,前述包括用于制造纤维状纤维素材料纸浆的机器部件
|
8479.10.0060
|
Bituminous pavers, self-propelled, each with a weight exceeding 14.9 metric tons but not exceeding 18.2 metric tons,with working width of 2.4m or more but not over 8.6m
|
自行式沥青摊铺机,每个摊铺机的重量超过14.9公吨但不超过18.2公吨,工作宽度为2.4米或以上但不超过8.6米
|
8481.30.9000
|
Check valves,of acrylonitrile butadiene styrene(ABS), each weighing 120 g or lesss
|
丙烯腈丁二烯苯乙烯(ABS)止回阀,每只重量不超过120 g
|
8481.30.9000
|
Check valves, of plastics
|
塑料止回阀
|
8501.31.5000
|
DC motors rated at 739.6 W, each with a housing with external diameter of 85 mm or more but not exceeding 90 mm and weight of 257 g or less
|
额定功率为739.6W的直流电机,每个外壳的外径为85mm或以上但不超过90mm,重量力257g或以下
|
8504.32.0000
|
Electrical transformers,each with a power handling capacity rating of 1.8KVA,with external dimensions measuring approximately 13.3 cm by 12.7 cm by 11.4 cm
|
电力変压器,每个的功率处理能力等级为1.8千伏安,外部尺寸约为13.3厘米×12.7厘米×11.4厘米
|
8515. 11.0000
|
Battery powered soldering irons or soldering guns,not over 18 cm in length
|
电池供电的烙铁或焊枪,长度不超过18厘米
|
8538.90.6000
|
Knos of injection molded plastics
|
注塑塑料旋钮
|
8539.90.0000
|
Molybdenum foil filament assemblies,designed for use in ultraviolet lamps
|
设计用于紫外线灯的钼箔灯丝组件
|
9013. 80.7000
|
Thinfilm-transistor, light emitting diode(LED)backlit flat panel liquid crystal display modules, each with an aluminum bezel and a video display diagonal measuring 113 mm or more but not over 339 mm
|
薄膜晶体管,发光二极管(LED)背光平板液晶显示模块,每个都带有铝质边框和113毫米或以上但不超过339毫米的视频显示对角线
|
9014.80.2000
|
Depth-sounding apparatus with digital display,each designed{ for installation in a 63.5mm hole in dashboard, designed for recreational boating use
|
具有数字显示功能的深度测量设备,每个设计用于安装在仪表板的63.5mm孔中,设计用于休闲划船用途
|
9018.90. 7580
|
Restraint packs designed for use with chest compressors, each containing one torso restraint,consisting of a cotton strap which fastens with hook and loop fasteners to the compressor,and one cover for a head stabilizer
|
设计用于胸部压缩机的约束包,每个包合一个躯干约束装置,包括一个用钩环紧固件固定在压缩机上的棉带和一个用于头部稳定器的盖子
|
9031.80.8085
|
Tuners designed to clip onto musical instruments and indicate whether the instrument is in tune
|
调音器设计用于夹在乐器上并指示乐器是否合格
|